Home » Products » Conset 45 T (F)
Conset 45 T (F)
Flexible Waterproofing Mortar
Indoor and outdoor rendering and levelling mortar walls, floors and ceiling in thickness from 1 to 10 mm
Description
Description
Indoor and outdoor rendering and levelling mortar walls, floors and ceiling in thickness from 1 to 10 mm
Field of Application
• Smoothening walls prior to restoration, ceramic tiles installation and painting.
• Smoothening and filling hairy cracks on the surfaces of formed cement, concrete, brick walls.
• Repairing old, damaged renders, concrete up to 1-10 mm
Properties
• High adhesion strength.
• Smooth and solid surface.
• Resistant to freeze and thaw.
• Applicable up to 1-10 mm thickness.
• Easily applicable.
Warnings
• Since conditions cement, irritating to eyes, respiratory system and skin. For further information
• refer to safety data sheet.
• Indicated consumption is a general information. It may change depending on the application
• conditions and surface properties.
Storage
Store in dry medium. Do not stack more than 10 bags on top of each other.
Packaging
25 kg multi-ply paper bags.
Technical Information
Technical Properties | (at 230 C) |
General Data | |
Appearance | Grey powder |
Shelf Life | 12 months when stored in the original sealed packing in dry place |
Application Data | |
Application Temperature Range | (+50C)-(+350C) |
Mixing Ratio | 4.25-5.25 liters water / 25 kg powder |
Pot Life | Min. 60 minutes |
Application Thickness | 1-10 mm (for single layer) |
Consumption (avr.) | 1.40 kg / m2 (per 1 mm thickness) |
Performance Data | |
Compresive Strength after 28 days (EN 12808-3) | ≥ 15.0 N/mm2 (28 days) |
Flexural Strength after 28 days (EN 12808-3) | ≥ 4.0 N/mm2 |
Tensile Strength (EN 1542) | ≥ 1.0 N/mm2 |
Service Temperature Range (after final cure) | (230C/-200C) |
Restrained Shrinkage-Expansion (EN 12617-4) | ≥ 0.8 N/mm2 |
Capillary Water Absorption (EN 13057) | ≤ 0.5 kg/m2h0.5 |
How to Use
• Substrates must be compact, free of dust, loose parts and clean from oils, grease, paint or adhesive residues when Conset 45 T (F) can be applied to damp surfaces without cure time will be slightly prolonged. It is advisable to wet highly absorbent substrates or better to apply CONSET PRIMER.
• Pour 25 kg of Conset 45 T (F) in to 4.25-5.25 liters of clean water slowly and mix to obtain a homogeneous paste free from lumps. (A low speed mixer is recommended to mix).
• Allow to stand for 5-10 minutes to mature. After remixing, the paste is ready for application.
• Apply Conset 45 T (F) with rendering machine flat trowel with a firm pressure to ensure a good adhesion.
• When applying on walls directly exposed to sun or wind, it is advisable to wet the surface of Conset 45 T (F) for the following 24 hours after application. For surfaces having ideal humidity and in ideal weather conditions, wait for 6 hours before tiling. Waiting time will be shorter in summer and longer in winter conditions.
• The mortar should be used within 60 minutes. Unfavorable climatic conditions like high temperature, low humidity, wind may shorten this duration.
• Dispose mortars of which pot life is expired.
• Clean tools and hands with water, surfaces with a damp cloth.