Home » Products » Conset FC & Plus
Conset FC & Plus
Conset FC & + is Two Component Acrylic modified cementitious coating for concrete and masonary. Conset FC & Plus powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and Conset FC & Plus liquid component of blended acrylic polymers.
Description
Highly flexible waterproofing compound having high resistance to salts for interior and exterior applications composed of emulsion polymer based liquid and waterproofing. workability improving additives containing cementitious powder components.
Fields of Application
• Waterproofing of swimming pools, hammam, bathrooms, showers, balconies, terraces before laying ceramic tiles.
• Waterproofing of concrete basins of portable water.
• Waterproofing of underground concrete elements like foundations, retaining walls, basement walls.
• Waterproofing of places subject to deformation, pedestrain and load traffic.
• Waterproofing of concrete basins subject to see water and de-icing salts.
Properties
• Approved to be used in contact with water intended for human consumption.
• Excellent bonding on all concrete and masonry.
• Non-corrosive for steel and construction elements.
• Applicable both on horizontal and vertical surfaces.
• Resistant to freeze-thaw.
• Prevents concrete against de-icing salts like calcium and sodium chloride, seawater and carbondioxide gas and carbonation.
• Easy to apply either by brush, roller or trowel.
Warnings
• Since contains cement, iritating to eyes, respiratory system and skin. For further information refer to safety data sheet.
• Indicated consumption is a general information. It may change depending on the application conditions and surface properties.
Storage
Liquid component: Store in temperatures from 50 C to 230 C in original sealed packing and keep the out of direct sunlight Powder component: Store in dry medium. Do not stack more then 10 bags on top of each other.
Packaging
Powder component: 20 kg multi-ply paper bags,
Liquid component: 10 Lt drums.
Technical Information
| Technical Properties | (at 280 C) |
| General Data | |
| Appearance | 1st component: Grey or White powder;
2nd component: White Liquid. |
| Shelf Life (Powder and liquid) | 12 months when stored in the original sealed packaging. |
| Application Data | |
| Application Temperature | (+50C) – (+350C) |
| Mixing Ratio | 10 lt liquid / 20 kg powder |
| Mixing | – 3 mins. with Max. 500 rpm mixer |
| Pot life | 4 hours |
| Consumption (avr.) | 1.7 kg/m2 (per 1 min thickness) |
| Waiting Time Between the Coats | 5-6 hours |
| Ready to use | 7 days |
| Performance Data | |
| Waterproofing Capacity (for 3 min thickness) | 7 bar (positive) |
| Tensile Strength (EN 1542) | ≥ 1.00 N/mm2 |
| Tensile Adhesion Strength After Cycling Without De-icing | ≥ 1.00 N/mm2 |
| Salts Impact (EN 13687-3: EN 1542) | |
| Tensile Adhesion Strength After Heat Ageing | ≥ 1.00 N/mm2 |
| (EN 1062-11: EN 1542) | |
| Crack Briding (210C, EN 1062-7) | ≥ 2.5 mm (A5) |
| Chloride Diffusion (ASTM C1202) | ≤ 200 Coulomb (Class: Very low permeability) |
| Water-vapor permeability (EN ISO 7783) | Class I; Sd ≤5 (Sd: Equipment air thickness) |
| Capillary Water Absorption (EN 1062-3) | ≤ 0.1 kg/m2h0.5 |
| Heat Resistance | (-400C)-(+800C) |
How to Use
• The substrate must be solid, dry, free of dust loose parts, paint, wax, oil, rust and traces of gypsum.
• Cementitious substrates must be cured. Use Conset 45 T & C in case of any loose and uneven substrates to get a sound and flat surface.
• Application should not be under direct sunlight. Dampen absorbent surfaces to be treated before hand with water or batter apply CONSET PRIMER.
• Pour 10 liters liquid component in to a suitable clean container. Then slowly add 20 kg powder component and mix with a low speed mixer to obtain a homogeneous lump free mix.
• Allow to stand for 5 minutes to mature. After remixing for 1-2 minutes, the paste is ready for application.
• Apply a thin of Conset FC 2K Plus with brush, roller or trowel, then after 5-6 hours apply a second coat, to have a final thickness of approximately 2-3 mm
• Insert a 4.5 x 4 mm mesh in the first layer of Conset FC 2K Plus when operating around expansion joints, joints between horizontal and vertical surface, areas with small cracks or places subject to stress. After the mesh has been laid apply a second layer of Conset FC 2K Plus when the first one has set (after 5-6 hours) or use CONSET waterproofing for these joints.
• Use Conset FC 2K Plus within potlife. Unfavourable climatic conditions (high temperature, low humidity, wind etc.) can reduce this time to just a few minutes.
• Dispose mortars of which pot life is expired. Clean tools and hands with water.
• Protect the surface from direct sunlight, rain, freezing and wind for the first 24 hours after application. If Conset FC 2K Plus applied surface is subject to foot traffic, cover the surface with a flooring compound or tiles.
• After applying Conset FC 2K Plus, wait at least 3 days for curing in favorable climatic conditions before laying ceramic tiles.
• Avoid mechanical damage on the waterproofing material during covering application.
• When Conset FC 2K Plus is used waterproofing drinking water tanks, do not fill the tank before waiting 28 days for curing.
