Description
Silicone based concentrated impregnation and surface protection material, providing water impermeability without decreasing the water vapor permeability of the surface applied on without giving any color or seen to it.
Field of Application
• Impregnation of porous mineral surfaces such as concrete. lime-sand stone, brick where waterproofing is recquired.
• Impregnation of surfaces coated with any kind of paint or plasters having relatively low water resistance.
• Priming of surfaces before the application of the paints and plasters.
Properties
• Penetrates in to the substrate deeply.
• Does not change the color and the gloss of the surface.
• Forms a hydrophobic zone on the surface.
• Dose not prevent the water vapor permeability of the surface applied on.
• Easy to apply with brush, roller or spray gun.
• Extremely durable; not affected by severe weather conditions like UV, rain and freezing.
How to Use
• The substrate must be solid, dry, free of dust, loose parts, paint, wax, oils, rust and traces of gypsum.
• Dilute with water at a ratio of 1/14 to use as a primer and at a ratio of 1/9 to use as an impregnation material at a ratio of 1/3 to use for protecting concrete. Conset SWR should be added to water and mixed.
• Use diluted product on the day of dilution, i.e: only the amount of product to be used on the same day should be diluted.
• Apply 2-3 generous, wet-on-wet coats with a brush, roller or spray gun after diluting.
• Clean the tools with water.
• Impregnate the small building materials by dipping technique.
• Do not apply in extremely hot weather, under direct sun light and when strong wind, fog, rain or frost is expected. Lower temperatures and higher relative humidity will lengthen the drying process.
• When used as a primer, apply the top coat on the following day of Conset SWR application.
