Home » Products » Conset 45 T (C)
Conset 45 T (C)
Sulphate and chloride resistant, cement based thixotropic structural repair mortar having polymer and fiber addition.
Description
Description
Indoor and outdoor rendering and levelling mortar walls, floors and ceilings in thickness from 5-30 mm.
Fields of Application
• Smoothening walls prior to restoration, ceramic tiles installation and painting.
• Smoothening and filling hairy cracks on the surfaces of foamed cement, concrete, brick walls.
• Repairing old, damaged renders, concrete up to 5-30 mm.
Properties
• High adhesion strength.
• Smooth and solid surface.
• Resistant to freeze and thaw.
• Applicable up to 5-30 mm thickness.
• Easily applicable.
Warnings
• Since contains cement, irritating to eyes, respiratory system and skin. For further information refer to safety data sheet.
• Indicated consumption is a general information. It may change depending on the application
conditions and surface properties.
Storage
Store in dry medium. Do not stack more than 10 bags on top of each other.
Packaging
25 kg multi-ply paper bags.
Technical Information
| Technical Properties | (at 230C) |
| General Data | |
| Appearance | Grey powder |
| Shelf Life | 12 months when stored in the original sealed packing in dry place |
| Application Data | |
| Application Temperature Range | (+50C)-(+350C) |
| Mixing Ratio | 4.25-5.25 liters water / 25 kg powder |
| Pot Life | Min. 60 minutes |
| Application Thickness | 1-10 mm (for single layer) |
| Consumption (avr.) | 1.40 kg / m2 (per 1 mm thickness) |
| Performance Data | |
| Compressive Strength after 28 days (EN 12808-3) | ≥ 15.0 N/mm2 (28 days) |
| Flexural Strength after 28 days (EN 12808-3) | ≥ 4.0 N/mm2 |
| Tensile Strength (EN 1542) | ≥ 1.0 N/mm2 |
| Service Temperature Range (after final cure) | (230C/-200C) |
| Restrained Shrinkage-Expansion (EN 12617-4) | ≥ 0.8 N/mm2 |
| Capillary Water Absorption (EN 13057) | ≤ 0.5 kg/m2h0.5 |
How to Use
• Substrates must be compact, free of dust, loose parts and clean from oils, grease, paint or adhesive residues when Conset 45 T (C) can be applied to damp surfaces without cure time will be slightly prolonged.
• It is advisable to wet highly absorbent substrates or better to apply CONSET PRIMER.
• Pour 25 kg of Conset 45 T (C) in to 4.0-5.0 liters of clean water slowly and mix to obtain a homogeneous paste free from lumps. (A low speed mixer is recommended to mix).
• Allow to stand for 5-10 minutes to mature. After remixing, the paste is ready for application.
• Apply Conset 45 T (C) with rendering machine flat trowel with a firm pressure to ensure a good adhesion.
• When applying on walls directly exposed to sun or wind, it is advisable to wet the surface of Conset 45 T (C) for the following 24 hours after application. For surfaces having ideal humidity and in ideal weather conditions, wait for 6 hours before tiling. Waiting time will be shorter in summer and longer in winter conditions.
• The mortar should be used within 25 minutes. Unfavorable climatic conditions like high temperature, low humidity, wind may shorten this duration.
• Dispose mortars of which pot life is expired.
• Clean tools and hands with water, surfaces with a damp cloth.
