When TILEMATE POOL highly deformable tile adhesive, which has waterproofing feature, is used in ceramic adhesion application, there will be no further need use additional water insulation material into material into small wet areas like kitchens, bathrooms etc, TILEMATEPOOL must be applied on the surface by means of a trowel to make up a layer that is 1-2 mm thick. The corner seams at the sites of application must be reinforced by means of CONSET WATERPROOFING TAPE. Adhesion with TILEMATEPOOL must be attempted after 24 hours. TILEMATE TG,TG F & TG EP Grouting mortar should be used as grouting. As cracking risk of ceramics at joining corners is very high, CONSET PU 40 Silicone Sealant should be used.